The SCTL Project

The SCTL Project

We know that transmission lines (Such as the power lines) usually use two conductors (usually one of the two conductors is used as a ground) for transfer the electrical power. Waveguides such as rectangular waveguide use single conductor to transmit power, but they have their own limitations. The following figure shows the simple structure of power transmission by two conductors.

If the number of conductors used in the transmission lines is reduced, it saves in space, cost, and troubleshooting time. This is possible with the SCTL circuit (As the following figure).

The SCTL circuits are located between the power source and the electrical load and transmit the electrical power through single wire. The most important point here is that the ground is completely removed in the receiver section. It should be noted that the cost of implementing and maintaining of this system is very low in comparison to the other methods.

Important Note

The SCTL does not contradict with any of the current scientific rules and can be proven by current scientific theories.

Application of the SCTL

Power Transmission Line

Telephone Lines

Integrated Circuit Packages

…

Contact us with

[e-mail]

[e-mail]

Watch the following video.